Press Brake Machine Buyer's Guide: How to Choose a Used Press Brake
A press brake machine is one of the most important purchases a fabrication shop makes. It decides what part lengths you can form, how thick a plate you can bend, and how quickly operators can move from one setup to the next. Buying used is a practical way to get serious tonnage and bed length without new-machine lead times, as long as you know what to compare and what to inspect. This guide covers the main types of press brake machinery, the specs that matter, and the used press brakes currently in stock at Universal Press & Machinery.
What Is a Press Brake Machine?
A press brake (also written press-brake, and sometimes searched as "brake press machine" or "press break machine") bends sheet metal and plate by forcing it between a punch on the moving ram and a die on the bed. By changing the tooling, the backgauge position and the depth of the stroke, one machine can produce simple 90-degree bends, offsets, channels, boxes and long formed parts.
Press brakes are rated by two headline numbers: tonnage (the bending force) and bed length (the longest part you can form). Everything else on the spec sheet tells you how comfortably the machine will handle your parts.
Types of Press Brake Machinery
Hydraulic Press Brakes
Hydraulic press brakes use cylinders to drive the ram. They can hold force through the full stroke, which makes them flexible for different materials and bend types. Most of the used press brake inventory on the market today, including most machines listed below, is hydraulic.
CNC Press Brake Machines
A CNC press brake machine adds a programmable control and backgauge. The control stores bend programs, positions the backgauge automatically and, on multi-axis machines, controls ram depth and crowning. More axes generally mean faster setups and better repeatability on complex parts, but they also mean more electronics to check before you buy.
Mechanical Press Brakes
Mechanical brakes use a flywheel and crank to drive the ram. They are simpler machines and are still used for repetitive bending work, but they need careful attention to clutch, brake and guarding condition when bought used.
Key Specs to Compare on a Used Press Brake
- Tonnage: Size it to the thickest, longest bend you run, with headroom. Tonnage needs rise quickly with material thickness and strength.
- Bed length and distance between housings: Bed length sets the maximum part length. Distance between housings sets how wide a part can pass fully between the side frames.
- Stroke, open height and throat depth: These decide how much room you have for tall tooling, deep boxes and flanges.
- Control and backgauge: Check the number of axes, the control brand, and whether the control is working and supported.
- Crowning: Crowning compensates for deflection on long bends so the angle stays consistent along the part.
- Installation needs: Some machines need a pit or floor slot for the bed, and every machine needs rigging that suits its weight.
Used Press Brake Machines In Stock at Universal Press
The machines below were listed for sale on our site at the time of writing. Specifications come from each listing; follow the links for full details and photos, or browse all used press brakes, our press brakes inventory and the wider fabricating equipment category.
- 2011 Baykal APHS 4116 x 440, 480 ton x 13'5" hydraulic press brake: 140" between housings, 12.6" stroke, 23.2" open daylight, Delem DA-69W control with 5 axes (Y1, Y2, X, R and crowning), 40 HP motor, approximately 60,000 lbs.
- 2005 Standard Industrial AB 325-16, 325 ton x 16' hydraulic press brake: 14'4" between housings, 8" stroke, 10" throat depth, Siemens Simatic control and a flush floor design.
- 1990 Cincinnati 350 AF 10, 350 ton x 12' CNC hydraulic press brake: 10'6" between housings, 10" stroke, 18" daylight, 10" throat, 6-axis Autoform control, bed crowning, CNC backgauge and light curtains. The listing notes a floor slot is required for the bed.
- 1995 Cincinnati 350 CB, 350 ton x 12' CNC hydraulic press brake: 10'6" between housings, 0 to 10" stroke, 18" daylight and an Autogauge CNC 2000 2-axis backgauge. The listing notes it needs a bed slot or can sit floor standing on vibration mounts.
- Cincinnati 230CBx10, 230 ton hydraulic press brake: 12' overall bed, 10'6" between housings, 10" stroke, 7" shut height, 17" open height, 8" throat and a Hurco Autobend 7 backgauge.
- Niagara HBM-230-10-12, 230 ton x 12' hydraulic press brake: 10'6" between housings, 10" stroke, 17" open height, 7" closed height, 30 HP, about 23,000 lbs. The listing states the Automec 1000 CNC control with front and rear backgauging requires repairs and is not operational.
- 1997 Amada HFB1253, 138 ton x 10' CNC hydraulic press brake: 106" between housings, 7.8" stroke, 18.5" open height, 16.5" throat, 6-axis CNC backgauge, estimated 16,500 lbs.
- Verson mechanical press brake: contact us for details on this machine.
How to Inspect a Used Press Brake Before You Buy
Whenever possible, see the machine under power and bend a sample part. Use this checklist as a starting point:
- Hydraulics: Look for leaks at cylinders, valves and hoses, and listen for pump noise. Check that the ram holds position.
- Ram and bed: Inspect for wear, dents or cracks, and confirm the ram stays parallel to the bed through the stroke.
- Control and backgauge: Run a program, move every axis and confirm the backgauge repeats. Ask about control support and spare parts.
- Bend quality: Measure the angle at both ends and the middle of a long test bend to check deflection and crowning.
- Safety equipment: Confirm guarding, light curtains, palm buttons and foot pedals are present and working.
- Tooling: Find out what punches and dies are included and what tooling style the machine accepts.
- Site and power: Compare the machine's dimensions, weight, voltage and any pit or slot requirement with your floor.
Buying or Selling Press Brake Machinery With Universal Press
Universal Press & Machinery is based in Ferndale, Michigan, and deals in used presses, fabricating machines and metalworking equipment. If you don't see the tonnage or bed length you need, contact our sales team or post your requirement on our wanted page. Planning to upgrade and sell an older brake? We buy equipment too.
Frequently Asked Questions
What does a press brake do?
A press brake bends sheet metal and plate. The ram drives a punch down into a die on the bed, forming straight, accurate bends along the length of the part. Shops use press brakes to make brackets, enclosures, channels, panels and other formed parts.
What are the two main types of press brakes?
The two main types are mechanical and hydraulic. Mechanical press brakes use a motor-driven flywheel and are fast and simple, while hydraulic press brakes use cylinders that give you more control over stroke, speed and tonnage. Most modern machines are hydraulic, often with CNC controls, and electric servo press brakes are a newer option.
Is a press brake a CNC machine?
It can be. Many press brakes have a CNC control that programs the ram depth and a multi-axis backgauge, so each bend repeats accurately. Older and simpler machines use manual or NC controls. When buying used, confirm the control powers up, runs a program and still has parts and support available.
How much does a press brake cost?
Price depends on tonnage, bed length, the control, age and condition. A used press brake usually costs well below a comparable new machine, which is why many shops buy used. Contact the Universal Press sales team for pricing on the press brakes currently in stock.
How many ton press brake to bend 1/4 steel?
For air bending 1/4 inch mild steel over a die opening about eight times the thickness (2 inches), you need roughly 15 to 18 tons per foot of bend length, so a 10 foot bend needs about 150 to 180 tons. Stainless steel and high-strength materials need more. Always confirm with your machine's tonnage chart and leave some headroom.
What is the rule of 8 on a press brake?
The rule of 8 says the V-die opening should be about eight times the material thickness for air bending mild steel. For example, 1/4 inch plate would use a die opening of around 2 inches. It is a starting point that balances bending force with inside bend radius, and thicker or harder materials often need a wider die.
What is the difference between a press brake and a brake press?
They are the same machine. Press brake is the standard industry term, while brake press and press break are common alternate names and spellings for a machine that bends sheet metal and plate between a punch and a die.