(1) Used 550 Ton Seyi Press Straight Side Press

Stroke: 18"
Shut Height: 32" (SDAU)
Adjustment: 10" Motorized with Digital Readout
Bed Opening: 32"Lr x 32"FB x 3 Openings
Slide Area: 122"LR x 61"FB
Bed Area: 122"LR x 61"FB
Window Opening: 47"FB x 25.5"TB
Rated Tonnage Point: .5" ABDC (ASDC)
Speed: 15 - 30 SPM
Micro Inch (Set up Speed): 5 - 8 SPM
Bolster Thickness: 7.8"
Floor to Bolster Height: 26" (Shallow 20" Pit Required)
Air Counter Balance Maximum Capacity (LBS): 15,000 Lbs
Air Pressure Required: 100 PSI
Main Motor (Eddy Current): 75 HP

Approximate Weight: 240,000 Lbs.
Approximate Overall Height: 21’8”

EQUIPPED WITH:
Sutherland “Auto Stamper” Center-Drive, Double Point, Straight Side Press
Special Order, Reinforced Slide Box and Bed
Bellows-Style Pneumatic Double Air Cushion - 70 Ton Capacity
Set of (4) Vibro Dynamic Isolation Mounts
Pacesetter Quick Die Change Lifter / Rails and Bed Extenders

Data Instruments Smartpac Including Diepropac, Procampac, Autosetpac, PM Module, SFI and Spanich Language Program

Data Instruments Shadow VI 36” (2) Sided Light Curtains with (1) Master and (2) Slave Floating Windows

Currently removed from service, disassembled and in storage.

COMPLETE FEED LINE ALSO AVAILABLE AT ADDITION COST OF $137,500.00
COE COIL REEL FOR PULL OFF OPERATIONS
Model # CPR-PO-15042
Maximum Coil Weight = 15,000 LBS
Maximum Coil Width = 42”
Maximum Coil OD = 60”
Mandrel Expansion Range = 19.5” -24.5”
30" Diameter Backplate
(3) Pad Mandrel Construction
One Set of (3) Coil Keeper
Material Width Scales on Mandrel Pads
Heavy Duty Welded Steel Construction
Hydraulic Threading Drive Feature
Hydraulic Mandrel Expansion Feature
Air Disc Break with Pressure Regulator to Prevent Coil Over Run
Extra Set of (3) Coil Keepers

COE FREE STANDING POWER STRAIGHTENER
Model # CPPS-350-42
(7) Straightening Rolls - 3.5” Diameter Design
Maximum Coil Width: 42”
Maximum Coil Thickness : .030” - .100" at 42" Wide
Maximum Coil Thickness: .210" at 12” Wide
Payoff Rate = Up to 100 FPM
Straightener Roll Height Scales and Pointers
Independent Adjustment of Straightening Rolls
Electrical Safety Disconnect
Peeler/Threader/Hold Down Station
15-HP DC Variable Speed Drive

COE AIR OPERATED THREADING TABLE
Model # CPDTT-4220
Air Raise and Lower of Threading Table
Adjustable Passline Feature
Dual Sided Table Construction
Based on 20-Foot Loop

COE AC SERVO DRIVE DIGITAL ROLLFEED
Model # CPRF-442
Maximum Material Width: 42” Wide
Maximum Material Thickness: .030”-.100" x 42” Wide
Maximum Material Thickness = .210" x 42” Wide
Maximum Speed = 348 Feet/Minute
Feed Angle = 180-240 Degrees
Acceleration = 55 Feet/Second/Second
Feed Accuracy = +/- .003”
Number of Feed Rolls = 2
Material Type = Pre-Straightened MCRS
Feed Roll OD = 4.00”
Feed Roll ID = 0” Solid Rolls
Feed Roll Body Width = 21”
Drive Ratio = 3.01:1
High Torque, Low Inertia, High Performance Free AC Brushless Servo Drive
Emergency Stop Button Mounted on Console
Single Cycle Push Button for Set-Up at Jog Speed