(1) Used 600 Ton Minster Hevi-Stamper Straight Side Press & Feed Line

Serial Number: (E2-600-030006)
Capacity: 600 Ton
Stroke: 12”
Shut Height to Bed: 43” (SDAU), With Micro Shut Height Indicator
Adjustment: 10”, Motorized
Bed Area: 120”LR x 60”FB, 7” T-Slotted Bolster
Slide Area: 120”LR x 60”FB, T-Slotted
Strokes Per Minute: 30 - 60 (Variable Speed)
Windows: 53” Wide x 21.94” High

Equipped With:
Air Clutch & Brake, Flywheel Brake
(4) Hydraulic Tie Rod Nuts
Automatic Air Counterbalance Adjustment, (2) Tanks
(4) BFM1150/62-2.5M10 Vibro/Dynamics Isolator Pads (6.87” High)
Link Light Curtains Front & Rear
Right Hand Crank Extension
100 HP Drive Motor, 1500/1800 RPM, 575 Volt / 3 Phase-60 Cycle
150 Full Load AMPS
Monitorflow Lubrication System
Minster PLC Control with Sliding Pendant
Press “Style 100” Operator Enclosure - Free Standing

Includes a Complete Minster Feed Line:

Line Direction: Left to Right
Line Speed: 40-800 Inches Per Minute
Max. Stock Width: 38”
Min. Stock Thickness: .030” (Feeder)
Max. Stock Thickness: .312” (Feeder)
Max. Stock Thickness @ Full Width: .250” (Feeder)
Max. Stock Width @ Full Thickness: 15.38” (Straightener)
Max. Coil Weight: 24,000 Lbs.
Max. Coil Car Weight: 35,000 Lbs.
Coil I.D. Range: 20” - 24”
Max. Coil O.D.: 72”
Ultrasonic Loop Control
Approx. Overall Line Dimensions: 591.25” Long x 222.25” Wide (At Coil Reel)
Note: All Line Data is Calculated for Mild Steel (50,000 PSI Yield Strength)

Feeder:
Minster Single Roll Electric Feed, Model MEF7-38S, (s/n: 18-51046)
Chrome Blast #3 Roll Finish, Powered Passline Adjustment 46” - 58”
Automatic Lubrication From Straightener
Hand Crank Adjustable Stock Guides, Coil Line Interconnects

Threading Table:
Minster Model MTT20-38S, (s/n: 13-81335)

Straightener:
Minster Model MSH40-38-7, (s/n: 13-50707)
Chrome Blast #3 Pinch Rolls, Hand Crank Adj. Stock Guides
Automatic Lube System, Driven Hold Down Arm
End Flattener (9” Width) and Peeler Table
Automatic Loop Height Adjustment
Coil Line Interconnections, DXF Package, Roll Cleaner

Reel:
Minster Model MRH20-38S Single Reel, (s/n: 13-70800)
Powered Adjustable Base with Manual Keepers, DXF Drawing Package

Coil Car:
Minster Model MCCH-35, (s/n: 13-90328)
9” Deck Riser

Approximate Dimensions (Press Only): 252” High x 192.06”LR x 120”FB
Approximate Weight (Press Only): 212,000 Lbs.

Shipping Weights:
Crown: 77,000#
Base & Bolster: 57,000#
Slide, (2) Tie Rods, Isolators: 44,100#
Uprights, (2) Tie Rods, (4) Nuts: 38,000#
Misc w/(4) Nuts: 15,000#
Feed Line: (3) Pieces: 31,000#

Excellent Condition - Dismantled for Immediate Delivery !!!