(1) Used 400 Ton Minster “Hevi-Stamper” High Production Press

Tonnage, heavy duty rating: 400 Tons
Dia. of Ecc. Shaft at mains & Eccentric: 9.00” –193.75”
Stroke of Slide: 12”
Adjustment of Slide: 6”
Shut Height, SDAU: 24” on Bolster
Shut Height, SDAU: 30” on Bed
Bolster Plate Thickness: 6”
Area of Slide, R-L x F-B: 108” x 54”
Area of Bed, R-L x F-B: 108” x 54”
Area of Bolster, R-L x F-B: 108 x 54”
Opening in Bed, R-L x F-B, w/1-2.5” rib: 102” x 36”
Distance between Gib Surfaces R-L: 110”
Distance Floor to top of Bed: 35”
Upright Opening, F-B: 31”
Speed (FE @ 35 SPM): 0-70 SPM
Drive Motor Power, RPM: 60HP/1800 RPM
Approximate Height: 226” with Vibro Mounts
Approximate Press Weight: 155,000 pounds

Equipped With:
Minster Combination Air Clutch & Brake
Pneumatic Counterbalances
Air Operated Flywheel Brake, electrically interlocked
Motorized Slide adjustment
Minster “Monitorflow” Recirculating Oil Lube
Minster Centralized Motor and Clutch Controls
Minster 4 Pole Limit Switch for Clutch Control
Minster 16 Pole Programmable Limit Switch featuring:
Automatic Top Stop
Digital Stroke Position
Actual Press Speed
Press Stopping Time
Motion Detection
Programmable for 4 Complete Setups
Minimum of 11 Auxiliary Pole
Eddy Current Drive
Wintriss SmartPAC Press Automation Controller
T Slotted Ram & Bolster

Model MEF6-32 Minster Electric Feed
32” maximum material width @ 0.156” thick
Right to Left feed direction
Adjustable mounting cabinet w/± 4.5” adjustment
53.5” Pass Line Height, Motorized w/Digital Position Readout
Electro-pneumatic Roll Lift for Pilot Release
Fixed Radius Incoming Catenary Support
Model MS30-32-7 Minster Straightener
32” maximum material width @ .120” thick (mild steel)
Angular Head Mounting Drive
3-100 FPM Modulating Dive
Air actuated Inlet and Exit Pinch Rolls
Fixed Radius Outgoing Catenary Support
Individually Operated Stock Guides
Ultrasonic Loop Control
Automatic Lubrication System
Model 10024Littell Single Reel
10,000 Pound Maximum Coil Capacity
60” Maximum Coil OD
24” Maximum Material Width
20”– 24” ID Expansion Range
Hydraulic Powered Mandrel Expansion
Powered Mandrel Jog
Pneumatic Mandrel Drag Brake

Note: All specifications contained herein are as the machine and ancillary equipment were originally manufactured and are subject to change at time of inspection.