(1) USED 3000 WATT 5 AXIS MITSUBISHI TWIN PALLET DIGITAL LASER

Total hours power on: 6572
Total hours of cut time: 1321
(2) motorized pallets: 86.6” x 122” each
Max workpiece size: 122.0” x 86.6” x 33.4”
Max workpiece weight: 4400 lbs
X axis stroke: 122”
Y axis stroke: 86.6”
Z axis stroke: 33.4”
W axis: +/- 360 degrees
U axis: +/- 180 degrees
H axis (height sensing): +/- .39”
Max processing feedrate: (X, Y, Z): 984 IPM
Max processing feedrate: (W, U): 180 degrees per second
Table pass height: 25.6”
Rapid travel speed: (X, Y): 1378 IPM
Rapid travel speed: (Z): 984 IPM
Rapid travel speed: (W, U): 180 degrees per second
Repeatability: (X, Y, Z): +/- .00059”
Machine unit dimensions (main machine only): 172.8”w x 161.4”h x 307.2” d
Machine unit weight (main machine onl): 17,600 lbs

RESONATOR:
3000 watt peak, 2000 watt constant 3020D resonator
Excitation method: 3 axis cross flow, SD
Control method: Power feedback
Power stability: +/- 1%
Beam mode: Low order (main component TEM 01)
Beam outer diameter: 0.83”
Beam divergence: (mrad): approx 2.5 or less (total angle)
Wave length: ([m): 10.6
Fequency setting range: (Hz): 10 - 3000
Duty Range: 1 - 100% adjustable
Output power adjustable range: 0 - 100% of rating
Resonator unit dimensions: 78.3”w x 63.8”h x 18.1”d
Resonator unit weight: 2650 lbs

LASER GAS:
Composition: CO2 : CO : N2 : HE / 8:4:60:28
Consumption amount: 2 liter/hour
Gas sealing time: 12 hours (during rated continuous oscillation)

CONTROL UNIT:
Floppy disk: 1.44 MB IBM compatable
Hard disk drive capacity: 2.0GB or 16000000 points
Graphic display: 10.4” TFT color lcd
Mounting: Onto processing machine
CPU / type: 64 bit / PC
Program memory size: 5000m or 32000 points
Minimum command unit: .0001”

This unit was manufactured in 2005 but installed new from the factory in January 2008
Can be inspected in plant, under power.