(1) Used 5000 Ton Williams & White 4-Post Downacting Hydroforming Press

Serial Number: C-4745
Capacity: 5000 Ton Pressing @ 4097 PSI
400 Ton (Stripping)
30 Ton Net Lift @ Fast Open
Stroke: 72”
Daylight: 112” (over Bolster)
Shut Height: 40”
Bed Area: 200” LR x 96” FB
Slide Area: 200”LR x 96”FB
Distance Between Columns: 202”
Distance Floor - Top of Bolster: 20”
Speeds: 800 IPM Advance
25 - 275 IPM Intermediate Pressing (to 1000 Ton)
6 - 60 IPM Pressing
30 - 200 Stripping
800 IPM Rapid Return

Equipped With:
Hydraulics:
Top Mounted
(2) 35” Diameter Main Cylinders / Single Acting
(2) 18-1/8” x 15” Diameter Kicker Cylinders / Double Acting
Floor Level Fill / Drain / Oil Level Sight Temp Gauges
(4) Oil Gear Axial Piston #PVV540 Primary Pumps
Denison Vane Auxilary Pumps
Intensifier for Hydroforming
Electrics:
Allen-Bradley PLC-5/40 Series Processor w/ Allen-Bradley Panelview Color Touch
Screen for Operator Interface w/ Minimum of 25% Spare I/O Capacity
Memory for Part Storage / Fault Monitoring / Temposonics
250 HP Main Motor / 1200 RPM
Trabon Automatic Lubrication System

Approx. Overall Dims.: 250” L-R x 156” F-B at floor / 250” L-R x 278” F-B at crown
Approximate Height Above Floor: 408” / Approx. Depth Below Floor: 90”
Estimated Total Weight: 838,000 Lbs.

PHOTOS WERE WHEN PRESS WAS LAST IN SERVICE !!!!!

We purchased this press from General Motors, Pontiac, Michigan Plant. They were using it for Hydroforming. We have moved it into our Ferndale, Michigan storage warehouse. It is offer loaded on buyers carriers, for immediate delivery.

All specifications are subject to verification by buyer.