(1) Used 2000 Ton Williams & White Hydraulic Press

2000 ton Capacity Pressing
400 tons Mechanical / Hydraulic Stripping
140 tons Electronically Stripping
30 tons US( Net Lift @ fast Open)
60" Stroke
100" Day Light Opening (Between Slide and Bed Bolster)
40" Shut Height
208" LR x 104" FB Between the Columns
206" LR x 102" FB Bed Area
206" LR x 102" FB Slide Area

Operating Speeds
1000 IPM Fast Close
25 - 275 IPM Intermediate Pressing to 1000 tons
7 - 70 IPM Pressing
30 - 200 IPM Stripping
900 IPM Fast Open

Equipment and Features+
Trabon Automatic Grease System+
T-Slots on 6" centers (33 T-Slots), 1" T-Slots, Front to back direction
Slide Locks ( Full stroke, 6" incremental, monitored for engaged position)
Slide Face Die Key Slot
(14) Pascal Model TRA Automatic Travelling Hydraulic Die Clamps
- Capacity: 11 Tons each, (7) on front and (7) on rear of press
- 25.5" reach from slide edge towards press centerline
(8) Atlas Automation Max-ROL Hydraulic Die Lifters
- (4) For Each Bolster, 75 Ton min. Die Lifting Capacity
(2) Rolling Bolsters, 206" x 102" x 14" thick
- L-R Travel Direction
- (4) Parker Low Speed High Torque Hydraulic Motors
- (4) 6" Hydraulic Cyinders in each bolster
- (6) 8" x 4" double acting hydraulic cylinders for clamping
(2) 31" Diameter Single Acting Main Cylinders
(2) 18 1/8" x 15" Diameter Double Acting Kicker Cylinders
Working Pressure @ 4000 Tons- 3950 PSI
Oil Cooling System- Water/Oil, Stainless Steel Brazepack Type Heat Exchanger
Oil Filtration System- (3) Micron Kidney Loop Filtration with Duplex Filters
Main Drive Pumps- (4) Oilgear Axial Piston# PVV540
Auxiliary Pumps- (2) Denison Vane # T6DC
Die Hydraulic Drive Pumps- (2) Oilgear PVG-130
Die Hydraulic Inching Pump- (1) Denison T6C
Die Hydraulics Accumulator System
Lifters & Seal Units Die Hydraulics Valve Circuits
Punch System Die Hydraulics Valve Circuits

Press Hydraulic and Die System Hydraulic Circuits are designed as redundant
systems to allow both systems to remain functional when with up to (2)
of the (4) Main Pump / Motor Groups Disabled.

General Assembly Drawings Available Upon Request.