(1) Used 1200 TON AP & T (LAGAN) BLANKING, EMBOSSING & CUTOFF LINE

Press No. 1
Pess Type LMB-12000
Press Force, Stepless Adjustment: 1200 Ton (12000 kN)
Stroke Length, Stepless Adjustment: 0-19.7” (0-500mm)
Max. Shut Height: 39” (1000mm)
Closing Speed: 1”/sec. - 9.6”/sec.
Pressing Speed: 0.12”/sec - 1.2”/sec.
Bed Size: 70.8” x 51” (1800 x 1300 mm)
Frame Opening: 51” L-R x 35” F-B (1300 x 900 mm)
Power Supply: 460V, 60 Hz, 500 A
Approx. Weight: 119,000 Lbs

Press No. 2
Press Type MH4-1000-08-08
Press Force: 100 Ton (1000 kN)
Stroke Length: 7.9” (200 mm)
Max. Shut Height: 20” (500 mm)
Bed Size: 42” x 42” (1070 x 1070 mm)
Frame Opening: 31” L-R x 31” F-B (800 x 800 mm)
Approx. Weight: 11,900 Lbs.

Cutoff Shear Type AKS-500-40
Shearing Force: 40 Ton (400 kN)
Maximum Shearing Width: 20” (500 mm)
Approx. Weight: 1,400 Lbs.

Pump Unit:
Pump Capacity (HP1): 95 G/Min (360l/min.)
Pump Capacity (HP2): 45 G/Min (170/lmin.)
El Motor (M1): 115 HP (86 KW)
Pump Capacity (HP3): 95 G/Min (360l/min.)
Pump Capacity (HP4): 17 G/Min (65l/min.)
El Motor (M2): 115 HP (86 KW)
Pump Capacity (HP20): 74 G/Min (280l/min.)
Pump Capacity (HP30): 8 G/Min. (30l/min.)
El Motor (M3): 10HP (7.5 KW)
Max. Working Pressure: 4.400 PSI (30.5 MPA)
Capacity of Hydraulic Oil Reservoir: 581 Gallons (220 Liters)

Voltage: 460, 60 Hz
Electricity Supply: 500 AMP

Strip Straightener - Type RMA-60-500
Coil Width: 20” (500 mm)
Maximum Thickness: 0.118” Steel / 0.157” Aluminum
Number of Feeding-In Rolls: 2
Number of Straightening Rolls: 9
Roll Diameter: 2.4” (62mm)
Driving Force: Electric Motor
Speed Control: Frequency Converter, 0-33 Ft/Min. (0-10 m/Min)
Loop Control: Measuring Wheel

Servo Roll Feeder - Type AE 95-500
Maximum Coil Width: 20” (500mm)
Number of Rolls: 2
Roll Diameter: 3.7” (95mm)
Driving Force: Electrical Servo
Speed: 0-98 Ft/Min (0-30m/Min)
Maximum Thickness: 0.188” Steel / 0.157” Aluminum
Roll Pressure: Pneumatic

Stacking Equipment LS:
Model: Auto Arm 604/S
Serial Number: 2893
Year: 1995
Horizontal Stroke: 27” (700mm)
Vertiacl Stroke: 1.57” (40mm)
Cycle Time: 2.4 Sec.
Material of Blank: Aluminum Disks
Size of Wooden Pallet: 24”x24” (610x610mm)
Minimum Diameter of Disk: 9.62” (244.5mm)
Maximum Diameter of Disk: 16” (405.8mm)
Maximum Thickness of Disk: 0.118” (3mm)
Maximum Height of Pack: 20” (500mm)
Maximum Temp of Blank: 40 Degree C
Installed Power: 7 KVA
Rated Voltage: 460 V, 3Ph, 60 Hz
Rated Current: 9 Amps
Compressed Air Pressure at Entry: 87 PSI (6 Bar)
Air Consumption: N1 / 1’ 50