(1) Used 6000 Ton Anton Bauer Hyprotec Internal High Pressure Hydroforming Press

Maximum die clamping force: 6000 Tons (60,000 kN)
Die Table: 154” x 154” with T-slots to attach lower die
Closed Die Installation room: 79” x 154” x 47”
Table height: 36” over ground
(2) lifting cylinders, max die closing force: 400 Tons (4000 kN)
Stroke to open die: 31.5”
Daylight opening: 78.5”
Hydraulic machine system consisting of:
Hydraulic oil tank: 2800 liter
(2) hydraulic pumps
Monitoring units for temp, pressure, level & filtration
(2) cooling systems
Forming system consisting of:
Forming fluid tank
Pump unit for the pressure ntensifier
Shielded pressure intensifier with valve system
Forming fluid filter system
Machine motion control system: Siemens PLC
Machine forming process control system:
Industrial computer with Hyproloc 5000 program
Delta servo Hydroloc controllers (24 axis)
Cycle time of less than 20 seconds
Forming speed controllable to 25mm/s
Main voltage: 3x415V/50Hz, control voltage: 24V DC, Power: 300 kVA

Approximate Overall Weight: 225 Tons
Approximate Overall Dimensions: 12’10” x 12’10” x 20’4” tall
note: this is for the press only, not the ancillary equipment included.