(1) Used 48” x .012” - .175” x 40,000 Lbs Nova Slitting Line

Materials: HRS, CRS, Alum., Pre-paint
Max. Coil Width: 50”
Thickness Range: .012 - .187”
Max. Coil Weight: 40,000#
Max. Shear: 50,000 PSI
Max. Yield: 50,000 PSI
Coil I.D.: Entry 20- 24”
Exit: 20”
Max. Coil O.D.: 72”
Line Direction: Left to Right
Mode of Operation: Driven
Line Speed: 0-1000 FPM

Cut Chart (Mild Steel)
Three (3) cuts of .187” @200FPM (approx.)
Twelve (12) cuts of .091” @500FPM (approx.)
Seven (7) cuts of .091” @1000FPM (approx.)

Equipment List:

Entry Coil Car (2002)
Mast Type
Floor Mounted
Self-contained Hydraulics
Powered lift and traverse
Pendant Control
Cable Reel

Uncoiler (2002)                                                     
Single Mandrel Type
“Pumpkin Tooth” Mandrel
Hydraulic Expansion
Hold-down with Powered Snubber Roll
Slide Base
Feed-up Drive
Eaton Water Cooled Brake
Water Chiller for Brake
                 
Peeler (2002)
Floor Mounted
Extending Blade Type
SL2096B

Entry Unit
Photo Edge Guide
Powered Entry Pinch Rolls
Manuel Side Guides

Slitter Base (2005)
125HP Baldor DC Motor
Gearbox (4.4348/1)

Slitter Heads (2005)                
Two (2) x 8” Diameter Arbor Heads
“Injector” Type
Powered Traverse and Locking
Powered Top Arbor Adjust

Pit Section (2002)
Pass-line Roll
Cross-over Table                                                          

Tension Stand (2002)
Drag Type
Separator Shaft
Exit Bridle Rolls

Recoiler (2005)                                                          
Hydraulic Expansion
Hydraulic Gripper
Hydraulic Push-off
Overarm Separator
150HP Baldor DC Motor
Two (2) Speed Gearbox

Entry Turnstile
Four (4) Arms x 40,000# per Arm
Powered Rotation
Arms Slotted for C-Hooks
Powered Push-off

One (1) Scrap Winder
Hydraulically Powered
Level Wind
Automatic Scrap Dump

Electrical Controls                                            
Main Operators Control Console
Auxiliary Operators Stations
AC & DC Control Cabinets
Eurotherm 590+ DC Drives
SL2096B

Slitter Tooling                                                 
Two (2) Sets of Knives
Steel Spacers
Rubbers
Misc. Separator Tooling

Hydraulic System