(1) Used 20,000 Lbs Allegheny Material Handling Die Seperator

Catalogue Specifications:
Total Weight Capacity: 20,000 Lbs
Upper Platen Weight Capacity: 10,000 Lbs.
Lower Platen Dimensions: 158” L-R x 54” F-B
Upper Platen Dimensions: 144” L-R x 54” F-B
Opening Distance - Minimum: 8”
Opening Distance - Maximum: 48”
Lift Motor, Horsepower: 2 HP/1800 RPM
Pendant Control w/Lift Switch (Raise / Lower) and Rotate Switch (Invert & Normal)
54” Roller Feed Table
(3) T-Slotted Roller Bases on Lower Platen “Air Bag Die Lifters” Allowing Die
to Move.
(6) T-Slotted Upper Platen

Note:
This machine is used to separate the upper die half from the lower die half.
The die is loaded into the unit with a fork lift or die truck. It is positioned on
the bolster with the use of alignment pins. The bolster is equipped with
“Air Bag Die Lifters” allowing the die to move on rollers. Once the die has been
positioned and clamped, the upper platen is lowered down to the top of the die
and clamped. Using a powered lift arrangement, the platen is raised thereby
separating the upper and lower die sections. Once separated the lower half
is moved off the bolster allowing the platen to lower. The platen is rotated
180 degrees to allow the upper half to be serviced.