(1) Used 32” Advance Adgressor Floor Scrubber

SPECIFICATIONS
General Specifications common to All Models
Machine Length: 61.5”
Machine Height Machine : 54”
Chassis Width: 32”

Solution Tank Capacity: 42 gal
Recovery Tank Capacity:42 gal

Sound pressure level
as per IEC 60704-1 (at operator): 68 dB(a)

Vibrations at the Hand Controls (ISO 5349-1) 1.12 m/s2
Vibrations at the Seat (EN 1032)0.35 m/s2

Transport Speed (Fwd. Maximum) 4.5 mph
Transport Speed (Rev. Maximum): 3.15 mph
Grade Ability (Transport) 20% / 11.5`
Grade Ability (Working –Scrubbing) 8% / 4.6`

Wheel Drive Motor : 1.5 HP
Vacuum Motor (3 stage) .75 HP
Vacuum Water Lift for one motor (Sealed): 68”
(Open Hole Adapter 1”): 18”
Vacuum Water Lift for two motors (Sealed): 78”
(Open Hole Adapter 1”): 25”

Power Source (Batteries): (6) 6 Volt @ 20 HR Rate
Battery Weight (305 amp) STD: 90 Lbs
Battery Weight (395 amp) Opt : 121 Lbs
. Battery Compartment Size (approx.)
Height (Max.)
Width (Max.)
Length (Max.)
Battery Chargers – see Electrical System Battery Section

SEE ATTACHED SPEC SHEET

Note: Also Available:
ENCORE “S” Class Walk BEHIND FLOOR SCRUBBER
143 Actual Hours