(1) Used / Never Used / 75 Ton Pheonix Heavy Duty Gap Frame Hydraulic Press

BED WIDTH X DEPTH (LR X FB): 52” X 30”
CAPACITY AT 1910 PSI: 75 TONS
DAYLIGHT (BOLSTER-TO-BOTTOM OF RETRACTED UPPER TOOL PLATE) 30”
STROKE OF CYLINDER (ADJUSTABLE): 18”
SHUT HEIGHT: (BOLSTER-TO-BOTTOM OF EXTENDED UPPER TOOL PLATE) 12”
THROAT (CENTERLINE RAM TO FRAME): 17”
BOLSTER-TO-FLOOR: 36"
NON-ROTATING RAM GUIDE
ALLEN BRADLEY LIGHT CURTAINS MOUNTED TO FRONT OF PRESS WITH BOLT ON EXPANDED METAL SIDE GUARDING.
4-POST UPPER GUIDED TOOLING PLATE
52" X 30" 4-POST UPPER GUIDED TOOLING PLATE WITH 18 (1 INCH) T-SLOTS (9 PER SIDE, FRONT-TO-BACK, 10" LONG).
CYLINDER SIZE: 10" DIAMETER BORE; 7" DIAMETER ROD
(FASTER) PRESS OPERATING SPEEDS:
ADVANCE: 490 IPM
PRESS: 61 IPM
RETURN: 480 IPM

SELF CONTAINED HYDRAULIC SYSTEM:
FOR USE WITH STANDARD HYDRAULIC FLUID - MOBIL DTE-26 OR EQUIVALENT.
63/21 GPM PUMP CONSTANT DELIVERY DOUBLE VANE TYPE AT 1800 RPM.
MANIFOLD MOUNTED VALVES WITH INDICATOR LIGHTS ON 4 WAY VALVES.
STANDARD INDUSTRIAL HYDRAULIC COMPONENTS.
RESERVOIR IS INTEGRAL WITH STRUCTURE. RETURN LINE FILTER WITH MECHANICAL INDICATOR.
HYDRAULIC LINES ARE CLAMPED FOR CONTROL OF SHOCK VIBRATION TO REDUCE STRESSES IN THE LINES.
HYDRAULIC TUBE RUNS PLACED FOR EASE OF MAINTENANCE AND COMPONENT PROTECTION IN MIND.
AIR-TO-OIL HEAT EXCHANGER WITH TEMPERATURE SWITCH.
SEQUENCE OF OPERATION:
CONTROL• PB-6 CIRCUIT, POSITION SPEED SHIFT; PRESSURE & DISTANCE REVERSAL
INITIATE ERGONOMIC SWITCHES SIMULTANEOUSLY (NO-TIE-DOWN), RAM ADVANCES. RELEASE ERGONOMIC SWITCHES, RAM RETURNS. HOLD ERGONOMIC SWITCHES, RAM ADVANCES TO AN ADJUSTABLE LIMIT SWITCH AND SHIFTS FROM "ADVANCE" TO
"PRESS" SPEED. WHEN THE RAM CONTACTS THE WORK, AND BUILDS TO PRE-SET PRESSURE THE RAM REVERSES AUTOMATICALLY (PRESSURE REVERSE) OR WHEN A PRE-POSITIONED ADJUSTABLE LIMIT SWITCH IS CONTACTED THE RAM REVERSES AUTOMATICALLY (DISTANCE REVERSE). ERGONOMIC SWITCHES MUST BE RELEASED TO START A NEW CYCLE (NON-REPEAT). RETURN STROKE IS ADJUSTABLE. ELECTRIC "JOGGING" IS INCLUDED FOR SET-UP. ALL PRESS AND MOTOR CONTROL SWITCHES ARE AT THE OPERATOR'S POSITION. THE RAM ADVANCE AND MOTOR START BUTTONS HAVE PROTECTIVE ENCLOSURES.
WIRING PROTECTED WITH RIGID CONDUIT.
MOTOR:
BALDOR 30 HP, 1800 RPM, TEFC WIRED FOR 480 VOLTS / 3 PHASE / 60 HERTZ
ELECTRIC CONTROLS:
DUAL BANNER "OPTO-TOUCH" BUTTONS.
SELECTOR SWITCH FOR "JOG UP/DOWN/RUN".
RETURN STROKE & DISTANCE REVERSAL LIMIT SWITCHES.
CONTROL CABINET NEMA 12 DUST PROOF AND OIL-TIGHT WITH FUSED DISCONNECT, IEC THROUGH-THE-DOOR TYPE.
ALLEN BRADLEY MICROLOGIX 1100 PROGRAMMABLE CONTROLLER. MAGNETIC STARTER & 1 10-VOLT TRANSFORMER.
SPECIFICATIONS ARE SUBJECT TO BUYER VERIFICATION

Specifications are subject to Buyer Verification