(2) 1200 Ton Dieffenbacher Hydraulic Drawing Press

Ram Specifications
Capacity: 1320 Ton
Number of Cylinders: 2
Return Force (Rapid Speed): 100kN
Return Force (Setup): 200kn
Permitted Load Torque (Left - Right): 900 kNm
Permitted Load Torque (Front - Back): 450 kNm
Permitted Load Torque (Left - Right) w/Stops: 7,000 kNm
Nominal Stroke: 31.5”
Daylight Opening: 75”
Ram Clamping Surface: 94.5” x 47.2” T-Slotted
Useful Area w/Stops: 86.6” x 47.2” T-Slotted

Downwards Working Speeds: 17 IPM @ 100% Force / 47 IPM @ 30% Force
Lowering Speed: 1063 IPM
Pull Back Rapid Motion (Less than 11,000 lbs Top Die): 1063 IPM

Locking Unit
Locking Bar Length (Approx.): 110.2”
Movement Area: +/- 7.9”
Preparation for Forming Elements, Total: 4 Pieces
Preperation for Web Elements, Total: 3

Forming Elements
Number of Pieces: 2
Nominal Force Per Element: 1500 kn
Nominal Stroke: 9.8”
Center - Center Distance: 16.5”
Max. Axis Clearance: 27.6”

Upward Forming speeds, One Element: 272 IPM @ 30% Nominal Force
118 IPM @ 100% Nominal Force
Return: 236 IPM

Web Elements
Number (Cylinder Pairs): 2 Pieces
Max. Rated Force Per Pair: 1600 kN
Stroke: 0.39”
Max. MPC/Ram Bowing, Nom. Force, 2/3 Contact: .0067” / Min

Multi Point Control Die Cushion, Type UF-1
Working Area: 70.9” x 47.2”
Height: 25.2”
Hydraulic Circuits: 13 Pieces
Cylinders: 26 Pieces
Force Per Cylinder: 800 kN
Stroke: 0.39”
Min. - Max. Mold Height: 19.7” - 43.3”
Parting Line: 55.1”
Max. Mold Weight: 22,000 Lbs

Table Height Above Floor W/O MPC: 0.00”
Press Height Above Floor: 275.6”
Press Height Below Floor: 86.61” / 114.17”
Floor Area: 153.5” x 78.7”
Approximate Weight: 227,000 lbs.

Equipped With:
Siemens Simatic Panel PC w/Touch Screen