(2) Preowned 1650 Ton Dieffenbacher Hydraulic Drawing Press

Ram Specifications
Capacity: 1650 Tons
Number of Cylinders: 2
Return Force (Rapid Speed): 100 kN
Return Force (Setup): 200 kN
Permitted Load Torque (Left - Right): 1120 kNm
Permitted Load Torque (Front - Back): 560 kNm
Nominal Stroke: 31.5"
Ram Clamping Surface: 94.5" x 47.2" T Slotted
Daylight Opening: 76"
Useful Area w/ Stops: 94.5" x 47.2" T Slotted
Downwards Working Speed: 17 IPM @ 100% Force / 47 IPM @ 30% Force
Lowering Speed: 1063 IPM
Pull Back Rapid Motion (Less Than 11,000 Lb. Top Die): 1063 IPM

Locking Unit
Locking Bar Length (Approx.): 110.2"
Movement Area: +/- 7.9"
Preperation for Forming Elements, Total: 4 Pieces

Forming Elements
Number of Pieces: 2
Nominal Force Per Element: 1500 kN
Nominal Stroke: 9.8"
Center - Center Distance: 16.5"

Upward Forming Speeds, One Element: 272 IPM @ 30% Nominal Force
118 IPM @ 100% Nominal Force
Return: 272 IPM
Upward Forming Speeds, Two Elements: 135 IPM @ 30% Nominal Force
59 IPM @ 100% Nominal Force
Return: 236 IPM

Distance from MPC to Ram at Top: 51.2"
Groove Size: 28H12
Groove Spacings (from the Middle): 8.3"

Max. MPC/Ram Bowing, Nom. Force, 2/3 Contact: .0067" / min

Multi Point Control Die Cushion, Type UF-2
Working Area: 78.7" x47.2"
Height: 25.2"
Cylinder Grid: 7.9"
Hydraulic Circuits: 1 Piece
Cylinders: 34 Pieces
Force Per Cylinder: 530 kN
Stroke: 1.6"

Table Height Above Floor: 0.00"
Press Height Above Floor: 270.5"
Press Height Below Floor: 86.61" / 114.17"
Floor Area: 157.5" x88.6"


EQUIPPED WITH:
Siemens Simatic Panel PC w/ Touch Screen

Approximate Weight: 275,000 Lbs