(1) Used 18 Stand B & K Complete Rollforming Line

Complete Rollforming Line - Consisting Of

Left to Right Line Direction

1 - 10,000 Lbs x 30” Wide Littell Model 90-30 Coil Reel With Coil Car, Year: 1980, 30” Coil Width, Coil ID 20”-24”, Coil OD 60”, Hydraulic Expansion, Inch Fwd / Rev, Lateral Travel of 12”, Electric Brake, Littell Model S200 Coil Car, 24”x36” With Rotary Head

1 - Littell Model 626D-7PD Powered Straightener, Year: 1980, Variable Speed, .031”-.156” Material Thickness, (7) Roll Straightener - 4” Diameter, Stock Guides, Pinch Rolls, Pass Line Height 62”, Electrically Timed Grease Lube System, Littell Powered Caterpillar Type Heavy Holddown Arm, Peeler, Stock Guides, Hydraulic Unit, New in 2018 - Allen Bradley PLC Interface Control Update

1 - Coe Model CPRF-S324 Press Mounted Servo Feeder - Year: 2018
Material Capacity: 0.040” - 0.124” @ 24” Wide, 90,000 PSI Yield HS Steel
No. of Rolls: 2
Roll Diameter: 3”
Full Body Width: 24”
Drive Ratio: 3.2:1
Acceleration: 60 Feet/Sec/Sec
Roll Speed: 367 FPM
Feed Accuracy: +/- 0.003”

Equipped With:
Full Width Upper & Lower Feed Rolls
Sealed Precision Roller Bearings
Precision Cluster Gear Driven Upper Feed Roll
Pivoting Upper Feed Roll To Assure Full Gear Mesh
Low Inertia Drive System for Accuracy and Efficiency
Rigid Machined Tie Bar Construction
Funneled Stock Path for Threading and Safety
Air Operated High Speed Pilot Pin Release Mechanism
Air Pressure Regulator for Exact Feed Roll Pressure
Slotted Press Mounted Plate with +/- 3” Adjustment
AC Servo Drive - Digital Control
4.4 KW Feeder Drive Package
4 Roll Catenary Section to Assure Proper Material Support
High Performance AC Brushless Servo Motor
Single Cycle Pushbutton for Set-up at Jog Speed
Remote Jog Pendant
Emergency Stop Push Button
Fused Electrical Safety Disconnect
Desk Type Slant Top Control Enclosure
480 Volt AC Three Phase Supply Voltage

Laser Variable Speed Loop Control on Exit Side of Feed: Used for Progression Interruption on Roll Former

Step Programmable Controller w/Touchscreen
This servo feed controller has a user friendly 5.7” color touchscreen operator interface. Job set-up troubleshooting are made easy by the customized operator screens, diagnostic information, and operator prompts. This controller is designed for “gagging” applications that require programmable outputs and repeating of a series of moves.
Standard Features Include The Following:
-Ergonomic Desk-Type Slant Top Electrical Console
-User Friendly 5.7” VGA Color Touchscreen
-6 Fully Programmable Outputs with Dwells
-Programming of Up to 50 Complex Move Patterns
-Move Programs Include Start and End Sequences
-Programs Can Include Loops and Repeats
-Adjustable Acceleration and Deceleration Parameters
-7 Digit Alpha-Numeric Job Name Assignments
-400 Job Storage Memory Capacity
-Based on 4000 Available Move Blocks
-Maximum Feed Length of 999.00 Inches
-English or Spanish Language Capability
-Inch or Metric Programming Capability
-Jog Forward and Reverse Feature
-Manual Feed Advance for Set-up
-Batch Counter with Output Signal
-Auxiliary Signal Output
-STRETCH PROGRAM FOR ROLL FORMING

**Six (6) Extra Fully Programmable Outputs (Total of Twelve (12) Fully Programmable Outputs)

1- 220 Ton Aida Model NC1-200(1) Single Point Gap Frame Press, 220 US Tons, 6.3” Stoke, 20.1” Die Height, 4.3” Slide Adjustment, 54.7” L-R x 26.7” F-B Bolster Area, 35~70 SPM, Motor/Electrics/Controls, Palm Buttons

1 - 18 Stand B & K Rollformer, 3 1/4” Spindle Diameter, 52” Roll Space, 12” Vertical Adjustment, First (10) Stands 16” Horizontal Centers, Last (8) Stands 32” Horizontal Centers, 75 HP Motor New in 2019, One Base,

1 - 150 Ton Airam 4-Post Cutoff Press, Bed Area: 112” L-R x 32” F-B, Distance Between Posts 100” L-R, Approximate Stroke: 1”, Approximate Open Height: 20”, Air Surge Tank