(1) New 2024 & (1) Used 2022 Sharp Radial Drills Model RD1230

FEATURES:
• Hardened and Ground Arm Slide ways and gears.
• Arm Elevation is controlled by Electric Motor
• Arm and head clamping controlled by electric motor.
• Safety device prevents arm from dropping even when bronze nut is worn.
• Counter balanced spindle (with casting) increases durability.
• Spindle depth setting with automatic kick out.
• T-Slots and Drain Channels on casting.
• Auto reverse tapping function.

STANDARD EQUIPMENT:
• Box Table
• Coolant System
• Work light.
• Toolbox
• Standard voltage is 220 V. 440 v needs to be factory order with a special motor or purchase a transformer, an optional item.

SPECIFICATION:

Diameter of column 11-13/16"
Distance from column surface to spindle center, max. 48-1/2"
Distance from column surface to spindle center, min. 13-3/8"
Travel of spindle head 35"
Distance from base surface to spindle end, max. 54"
Distance from base surface to spindle end, min. 19-3/8"
Elevating height of arm 34-5/8"
Effective area of table 27-5/8"x19-5/8"x15-3/4"
Dimensions of base 67-11/16"x27-15/16"x6-1/2"
Taper hole in spindle #4 MT
Stoke of spindle 9-7/8"
R.P.M. of spindle (rpm range x steps) 44-1500 x 12 Steps
Feed of spindle (1PR x steps) 0.002"-0.006" x 3 Steps
Main motor (HP) 5 HP (2 speed motor)
Elevating motor (HP) 1 HP
Clamping motor for column and gearbox (HP) 1 HP
Clamping motor for arm (HP) 1 HP
Coolant pump (HP) 1/8 HP
Machine height from floor, max. 109-1/2"
Measurement (LxWxH) 80"x39"x89"
Approximate shipping weight 4,950 Lbs.
Cast Iron
Drilling 2-3/16"
Capacity Tapping 1-1/2"
Boring 4-3/4"
Steel
Drilling 1-5/8"
Capacity Tapping 1"
Boring 3-3/8"

Total Power Consumptions
• 220V: 8KVA/25 amps
• 440V: 8KVA/12.5 amps

OPTIONAL ACCESSORIES:

Tilting Table 32” x 28” x 24” WEIGHT 3960LBS RD1230-TILT $ 13,330.00
440 V transformer TF440/6KVA net $ 1,600.00

CSA/UL parts upgrade Net $ 5,075.00

CSA/UL compliance certificate by CSA Group in Los Angeles Net $ 4,535.00

General Notes:
Delivery: If not in stock, delivery lead time will be verified by the factory after receipt of your written, firm purchase order. Lead time is approximately 180 days
F.O.B.: Gardena, Ca. U.S.A.
Sharp Industries responsibility ceases when delivery is made to the carrier. Any claim for loss and/or damages must be made by the purchaser against the carrier.
Terms: Sharp Industries Standard Terms & Conditions will apply.
All factory special order machines require the following: End user purchase order to be issued to Sharp Industries as the Seller.
• 30 Per Cent (30%) down payment with your purchase order.
• Balance prior to shipment.
Warranty: Sharp Industries Limited Warranty will apply.

Prices and specifications subject to change without notice

Warranty on New Radial Arm Drill: One (1) Year
Warranty on Used Radial Arm Drill: Ninety (90) Days

Sharp Industries Inc. Limited Warranty
Sharp Industries warrants to the original purchaser,
other than a purchaser for resale, (the “Purchaser”)
that Sharp Industries machine tools shall be free of
defects in materials and workmanship.
For a period of one (1) year from completion of
installation, or for a period of fifteen (15) months
from date of shipment, whichever is earlier,
Sharp Industries will, at its sole and exclusive
discretion, either replace or repair any machine or
part thereof defective in workmanship or material, at
no charge to the Purchaser.
All warranty repairs must either be performed by or
authorized by a Sharp Industries Authorized Service
Organization. To obtain warranty service, Purchaser
must contact their local Sharp Industries Authorized
Service Organization. Purchaser must provide
verification of the date of delivery/installation when
requesting warranty service (dated installation report).
Ground freight charges (UPS regular or common carrier
truck) for all warranty replacement parts are paid by
Sharp Industries. If machine is not operational,
Sharp Industries will pay next-day air shipment charges
for necessary parts weighing 100 lbs. or less. Materials
or parts alleged to be defective should be returned to
Sharp Industries, at Sharp Industries’ request, transportation
charges prepaid. After the warranty repair or replacement of a
defective part, Sharp Industries’ warranty for such part shall
continue for ninety (90) days or for the remainder of the
original Limited Warranty, whichever is longer.

WARRANTY LIMITATIONS
This warranty shall remain in effect only if the machine is used and maintained in accordance with all operating and maintenance instructions set forth in the manuals and instruction sheets furnished by Sharp Industries. Sharp Industries shall have no liability to repair or replace defective parts until the Purchaser has fulfilled its payment obligations. No allowance will be made for repairs or alterations made without Sharp Industries’ prior written consent or approval. The limited warranty provided by Sharp Industries excludes the following:
1. Damage, malfunction, or failure caused by or resulting from improper maintenance, misuse, neglect, accident, or any other cause beyond the control of Sharp Industries.
2. Damage, malfunction, or failure caused by modification of the machine (mechanical or electrical) without written authorization by Sharp Industries.
3. Damage, malfunction or failure caused by installation or use of accessories or peripherals not purchased through or authorized in writing by Sharp Industries.
4. Paint, batteries, filters, fluids, fuses, light bulbs, or any commonly expendable item.
5. Damage to machines and/or components while being transported from Sharp Industries’ warehouse or facility to their destination.
6. Accessories or peripherals not manufactured by Sharp Industries, which shall be subject only to whatever warranty that is supplied by the manufacturer of such product.
No person, agent, distributor, dealer, or company is authorized to change, modify or amend the terms of this Limited Warranty in any manner. Sharp Industries makes no warranties, guarantees or representations, express or implied with respect to the machine tool, or parts thereof, except to the extent such warranty is set forth herein. The equipment covered does not necessarily comply with any codes or standards unless specifically quoted, ordered, and so accepted.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR USE OR PURPOSE. SHARP INDUSTRIES’ LIABILITY UNDER THIS WARRANTY IS EXPRESSLY LIMITED TO ITS PROMISE TO REPAIR OR REPLACE THE DEFECTIVE GOODS. SHARP INDUSTRIES SHALL HAVE NO FURTHER LIABILITY IN CONTRACT OR NEGLIGENCE OR UNDER ANY OTHER THEORY OF LAW OR EQUITY FOR ANY DAMAGES, DIRECT OR INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL, OR ANY DELAY RESULTING FROM THE DEFECT.

**Prices and specifications subject to change without notice.