(1) Used Sharp model RD1230 Radial Arm Drill

FEATURES:
• Hardened and Ground Arm Slide ways and gears.
• Arm Elevation is controlled by Electric Motor
• Arm and head clamping controlled by electric motor.
• Safety device prevents arm from dropping even when bronze nut is worn.
• Counter balanced spindle (with casting) increases durability.
• Spindle depth setting with automatic kick out.
• T-Slots and Drain Channels on casting.
• Auto reverse tapping function.

STANDARD EQUIPMENT:
• Box Table
• Coolant System
• Work light.
• Toolbox
• Standard voltage is 220 V. 440 v needs to be factory order with a special motor or purchase a transformer, an optional item.

SPECIFICATION:

Diameter of column 11-13/16"
Distance from column surface to spindle center, max. 48-1/2"
Distance from column surface to spindle center, min. 13-3/8"
Travel of spindle head 35"
Distance from base surface to spindle end, max. 54"
Distance from base surface to spindle end, min. 19-3/8"
Elevating height of arm 34-5/8"
Effective area of table 27-5/8"x19-5/8"x15-3/4"
Dimensions of base 67-11/16"x27-15/16"x6-1/2"
Taper hole in spindle #4 MT
Stoke of spindle 9-7/8"
R.P.M. of spindle (rpm range x steps) 44-1500 x 12 Steps
Feed of spindle (1PR x steps) 0.002"-0.006" x 3 Steps
Main motor (HP) 5 HP (2 speed motor)
Elevating motor (HP) 1 HP
Clamping motor for column and gearbox (HP) 1 HP
Clamping motor for arm (HP) 1 HP
Coolant pump (HP) 1/8 HP
Machine height from floor, max. 109-1/2"
Measurement (LxWxH) 80"x39"x89"
Approximate shipping weight 4,950 Lbs.
Cast Iron
Drilling 2-3/16"
Capacity Tapping 1-1/2"
Boring 4-3/4"
Steel
Drilling 1-5/8"
Capacity Tapping 1"
Boring 3-3/8"

Total Power Consumptions
• 220V: 8KVA/25 amps
• 440V: 8KVA/12.5 amps

OPTIONAL ACCESSORIES:

Tilting Table 32” x 28” x 24” WEIGHT 3960LBS RD1230-TILT $ 13,330.00
440 V transformer TF440/6KVA net $ 1,600.00

CSA/UL parts upgrade Net $ 5,075.00

CSA/UL compliance certificate by CSA Group in Los Angeles Net $ 4,535.00

General Notes:
Delivery: If not in stock, delivery lead time will be verified by the factory after receipt of your written, firm purchase order. Lead time is approximately 180 days
F.O.B.: Gardena, Ca. U.S.A.
Sharp Industries responsibility ceases when delivery is made to the carrier. Any claim for loss and/or damages must be made by the purchaser against the carrier.
Terms: Sharp Industries Standard Terms & Conditions will apply.
All factory special order machines require the following: End user purchase order to be issued to Sharp Industries as the Seller.
• 30 Per Cent (30%) down payment with your purchase order.
• Balance prior to shipment.
Warranty: Sharp Industries Limited Warranty will apply.

Prices and specifications subject to change without notice

90 DAY Sharp Industries Inc. Limited Warranty

**Prices and specifications subject to change without notice.