(1) 3800 Ton Danly - Clearing - Verson 180” Tandem Press Line

IN PLANT UNDER POWER

All Presses Completely Overhauled in 2016
Very Little Use Since Install - Prototype / Tryout and Short Runs

Complete 3800 Ton Tandem Press Line

(1) Used 3800 Ton Danly Double Action Press (M#7682)
Model #DE4-2500-1300-180-96 (New 1973)

Inner Slide:
Capacity: 2500 Ton @ 1/2” Up
Stroke: 42”
Shut Height Over Bed: 94”
Slide Adjustment: 10”
Inner Slide Area: 162” L-R x 78” F-B

Blankholder:
Capacity: 1300 Ton @ 1/2” Up
Stroke: 36”
Shut Height Over Bed: 84”
Slide Adjustment: 10”
Blankholder Area: 180” L-R x 96” F-B
Bed Area: 180” L-R x 96” F-B
Bed Opening: 167” L-R x 69” F-B
Speed: 6-11 SPM Single Stroke / 8 - 14 SPM Continuous

Equipped With:
Air Clutch & Brake
Die Clamping
Hydraulic Overloads
Hydraulic Tie Rod Nuts
Rolling Bolster - Front to Back Direction
Recirculating Lubrication System
Electrics, Motor and Controls

Approximate Weight: 1,400,000 Lbs.
Approximate Dimensions: 300” L-R x 324” F-B at Top / 216” F-B at Feet
Above Floor: 335” / Below Floor: 146”

(1) Used 1600 Ton Clearing 4- Point Straight Side Press (M#7681)
Model #S4-1600-180-100 (New: 1956)
Capacity: 1600 Ton
Stroke: 32”
Shut Height Over Bed: 64” (SDAU) (Note: press has a 4” column riser)
Slide Adjustment: 18:
Bed Area: 180” L-R x 100” F-B
Slide Area: 180” L-R x 100” F-B, T-Slotted
Speed: 12 SPM

Equipped With:
Torc Pac 90 Clutch
12” T-Slotted Bolster
Die Clamping
Electrics, Motor and Controls
Recirculating Lubrication System

Approximate Weight: 622,000 Lbs.
Approximate Dimensions: 272” L-R x 158” F-B
Bottom of Feet to Top Of Press: 362” / Bottom of Feet to Bottom of Press: 56”

(2) Used 1000 Ton Verson, Four Point, Eccentric Geared Press (M#7679 / 7680)
Model #SE4-1000-180-96 (New 1980)
Capacity: 1000 Ton
Stroke: 36”
Shut Height Over Bed: 101” (SDAU)
Slide Adjustment: 24”
Bed Area: 180” L-R x 96” F-B
Slide Area: 180” L-R x 96” F-B, T-Slotted
Speed: 16 SPM

Equipped With:
Air Clutch & Brake
Air Counterbalances
Hydraulic Overloads
Die Clamping
Recirculating Lubrication System
Rolling Bolster (Currently Not Being Used)
8-Point Gibbing
Electrics, Motor and Controls

Approximate Weight: 609,000 Lbs.
Approximate Dimensions: 288” L-R x 164” F-B x 365” Above Floor, 95” Below Floor

(UPM Machine #7682/7681/7680/7679)