A Buyer's Guide to Used Machines and Press Room Accessories

Nov 17, 2026 | Carson Patrona

Metalworking Equipment and Tooling: A Buyer's Guide to Used Machines and Press Room Accessories

Whether you run a stamping plant, a job shop or a fabrication floor, your output depends on two things working together: the machines that form, cut and machine the metal, and the equipment and tooling that keep those machines set up and running. Buying used metalworking equipment is one of the most cost-effective ways to add capacity, but each machine still needs the right accessories, from bolster plates to die carts, to be productive. This guide walks through the main types of metal processing equipment, the press room tooling that supports them, and how to match the two when you buy used.

What Counts as Metalworking Equipment?

Metalworking equipment covers any machine that shapes, cuts, joins or finishes metal. Most metalworking machines fall into four groups, and many shops run some of each.

Presses

Mechanical, servo and hydraulic presses do the stamping, blanking, drawing and forming work in high-volume plants. Gap frame (OBI) presses handle smaller dies and quick changeovers, while straight side presses handle larger dies and higher tonnage. Current examples in our used presses inventory include a used 600 ton Minster Model E2-600-144-60 Hevi straight side press, a used 165 ton Aida single point gap frame servo driven press and a used 60 ton Bliss Model C-60 flywheel OBI press.

Coil Processing Equipment

Coil-fed press lines need equipment to hold, straighten and feed the strip: uncoilers, straighteners, servo feeders, complete feed lines and cut-to-length lines. Our coil feeding and handling category is one of the largest in our inventory, with listings such as a used 20,000 lb x 48 in. Dallas complete coil feed line, a factory reconditioned COE 60 in. x .250 in. thick cut to length line with stacker and new Coilquip coil upenders.

Fabricating Machines

Fabricating machines cut, punch and bend sheet, plate and structural shapes. Our fabricating equipment category includes press brakes, shears, ironworkers, turret punches and lasers, for example a used 10 ft. x 1/2 in. Wysong mechanical shear, a used 70 ton Ironcrafter ironworker, a used Amada PEGA 357 turret punch press and a used 2500 watt Mazak U44 Space Gear 5 axis laser. If bending is your focus, see our blog guide to buying a used press brake machine.

Machining and Toolroom Equipment

Machining centers, mills, lathes and grinders build and maintain dies, fixtures and finished parts. Browse our CNC equipment, machining and toolroom categories for machines such as a used Tarus 3+2 CNC gantry mill, a used Fadal Model VMC15 vertical machining center, a used Bridgeport Series 1 vertical knee mill and a 1940 Monarch 27N engine lathe.

Equipment and Tooling for the Press Room

A press or brake is only as useful as the equipment and tooling around it. These accessories are easy to overlook when budgeting for a used machine, yet they often decide how quickly it can go into production.

How to Match Equipment and Tooling When You Buy Used

Before you buy accessories for a used machine, collect the numbers that have to line up:

  • Bolster size and mounting pattern: Compare the bolster length, depth, thickness and T-slot or hole pattern with the press bed and your die shoes.
  • Shut height: Add die height, bolster thickness and any riser or spacer, then confirm the total fits within the press's shut height and adjustment range.
  • Die weight: Choose a die cart or handler rated above your heaviest die, with a deck large enough for the die footprint.
  • Tonnage and stroke: Make sure the press or brake has enough force and stroke for the tooling you plan to run.
  • Coil width and thickness: On coil lines, match the uncoiler, straightener and feeder to the widest and thickest material you run.

Tips for Buying Used Metal Processing Equipment

  • Inspect under power when you can. Watching a machine cycle tells you far more than photos.
  • Ask for the details. Request specifications, serial numbers, maintenance history and any known issues in writing.
  • Plan the move. Weight, dimensions, rigging, foundations and pits often drive the real installed cost.
  • Check your power. Confirm voltage, phase and motor horsepower match your plant.
  • Think in systems. A press, feed line and die handling package that already work together can shorten startup time.

Find Metalworking Equipment and Tooling at Universal Press

Universal Press & Machinery in Ferndale, Michigan, buys and sells used presses, coil handling, fabricating and machining equipment, along with the tooling and accessories that support them. Browse our active inventory, contact our sales team with your specifications, or tell us what you're looking for on our wanted page.

Frequently Asked Questions

What equipment is commonly used in metal fabrication?

Common metal fabrication equipment includes press brakes for bending, shears for cutting sheet and plate, ironworkers and punch presses for punching and notching, saws, plate rolls and welding equipment. Stamping presses with coil handling lines are used for higher-volume formed parts.

What are five types of metalworking machines?

Five common types are lathes for turning round parts, milling machines for cutting flat surfaces and slots, presses for stamping and forming, press brakes for bending sheet and plate, and grinders for precise finishing.

What are the 7 basic machine tools?

A common list of the seven basic machine tools is the lathe, drill press, milling machine, shaper, planer, grinder and power saw. Most modern machining equipment, including CNC machines, is built on these same cutting processes.

What tools are commonly used in metalworking?

Metalworking uses both machines and tooling. Machines include lathes, mills, presses and press brakes, while tooling includes punches and dies, cutting tools, fixtures and press room accessories such as bolster plates, ram spacers and die carts that support how dies are mounted and moved.

What is a metal machine called?

A machine that shapes or cuts metal is generally called a machine tool. Specific names depend on the process, such as a lathe, milling machine, grinder, press or press brake.

What is another word for metalworking?

Depending on the work, metalworking is also called metalwork, metal fabrication or machining. Fabrication usually refers to cutting, bending and assembling, while machining refers to removing material with cutting tools.